REFORM-3PC.V7.0
FRNC-5PC.V8.0 通用加热炉工艺计算软件
REFORM-3PC 烃类蒸汽转化炉的炉膛截面评级程序Steam Hydrocarbon Reforming Simulation Program
REFORM-3PC is a rating program for the firebox sections of Steam-Hydrocarbon Reformer furnaces, which are used in Hydrogen, Ammonia and Oxo-Alcohol production. Based on user-supplied furnace geometry and process information, the program calculates operating parameters such as firing rate, furnace efficiency, tube skin temperatures, gas-and process-side temperature profiles, heat duties and fluxes.
REFORM-3PC simulates most reforming furnace types such as Up, Down, Side Fired and Terrace Wall. It can model any catalyst shape or size. REFORM-3PC performs process-side kinetics calculations based on stream composition and temperature for each tube increment. The program uses a 3-dimensional flue gas zone ysis for accurate process kinetics in each tube increment. Both primary and secondary (combustion) reactions are calculated.
REFORM-3PC Steam Hydrocarbon Reforming Simulation Program
PFR Logo
REFORM-3PC is a rating program for the firebox sections of Steam-Hydrocarbon Reformer furnaces, which are used in Hydrogen, Ammonia and Oxo-Alcohol production. Based on user-supplied furnace geometry and process information, the program calculates operating parameters such as firing rate, furnace efficiency, tube skin temperatures, gas-and process-side temperature profiles, heat duties and fluxes.
REFORM-3PC simulates most reforming furnace types such as Up, Down, Side Fired and Terrace Wall. It can model any catalyst shape or size. REFORM-3PC performs process-side kinetics calculations based on stream composition and temperature for each tube increment. The program uses a 3-dimensional flue gas zone ysis for accurate process kinetics in each tube increment. Both primary and secondary (combustion) reactions are calculated. Reformer Heater
诚信合作，质量保证：@@@@@@@@@@@@@@@@@@@@
QQ：16264558
电话：13963782271
诚信合作，质量保证：@@@@@@@@@@@@@@@@@@@@
REFORM-3PC has user-friendly graphical input systems for either DOS (via Windows 3.1) or Windows 95/98/NT/2000 operating systems. The input systems contain on-line help and input limit and error checking.
REFORM-3PC can model gas or liquid fuels and can be run in full performance rating mode or simple thermodynamic prediction mode to get overall reaction yields. The program calculates both circumferential and longitudinal tube wall temperature profiles.
Following are some of the applications of REFORM-3PC:
bullet Furnace Rating and Optimization
bullet Decrease Fuel Usage
bullet Extend Tube Life
bullet Evaluate Process Variable Changes
bullet Evaluate Fuel, Firing or Burner Changes
bullet Determine Efficiency and Heat Flux Profiles
bullet Monitor Catalyst Activity
bullet Evaluate Firebox or Tube Modifications
bullet Optimize Steam and Recycle Flows
bullet Use as HAZOP or Benchmarking Tool
bullet Furnace Designs
bullet Perform, Check or Compare Designs
bullet Rate Alternate Operations
bullet Check Variations to Specs
bullet Check Burner Types and Locations
